Report Highlights
Engineering plastics and metals have been extensively replaced by polypropylene (PP) compounds in the automotive parts to achieve a significant weight reduction and cost savings. PP compounds are cost-effective yet have outstanding mechanical properties and moldability accounting for more than half of plastics used in a vehicle. The adoption of PP compound for new automotive applications and the cannibalization of other plastics by PP compound are expected to increase the share of PP compound in the automotive plastics market from 28.4% in 2017 to 34.4% in 2030. PP compounds have managed to substitute ABS in several lower-end automotive applications. This substitution is further expected in these applications such as center consoles, door panels, and side pillars. PC/ABS is a highly impact-resistant polymer which finds use in bumpers, but it has been losing its share to TPOs, as TPOs provide a cost-effective alternative to PC/ABS. LFT-PP also substitutes PC/ABS in overhead consoles of automobiles. Weak impact and aesthetic performance limit the usage of virgin PP in the automotive industry. Major applications for virgin PP in automotive industry include surge tanks, battery cases, covers, and door liners. Demand for virgin PP in the automotive industry is tied-up with the increasing demand for PP compound in the automotive industry. The direct application of virgin PP in the automotive industry faces replacement threat from PP compound.
Glass-reinforced PP compound utilize short as well as long glass fibers, which helps in improving the stiffness of the material. Short glass-reinforced PP compound finds its application in the engine and transmission of the vehicle in which stiffness is an important criterion for material selection. The use of long glass fiber-reinforced PP is fast growing due to its potential to replace metals. Glass-reinforced PP compounds are widely used in the engine and transmission applications such as air filer housing and battery. The parts that use glass-reinforced PP compounds require high strength and stiffness. Exterior applications utilize glass-reinforced PP compound in high-end vehicles for screens aerodynamics, air vent control, and sliding roof system. The exterior applications are not very common in lower-end vehicles. The use of glass-reinforced PP compound in interiors is to make the frame for parts such as door panels, center consoles, instrument panel, and seats, among others.
The global glass-reinforced PP compound market is expected to grow at a CAGR of 8.07% and 6.79% between 2018 and 2030 in terms of value and volume, respectively.
The report is a compilation of different segments of the global glass-reinforced PP compound market, including market breakdown by automotive applications, and geographical areas. Herein, the revenue generated from the automotive application areas (interior, exterior, and engine & transmission), and geographies (North America, Europe, Asia-Pacific, Middle East and Africa, and South America) are tracked to calculate the overall market size, both in terms of value ($million) and volume (kilotons). While highlighting the key driving and restraining forces for this market, the report also provides a detailed summary of the global glass-reinforced PP compound market for the automotive industry. It also includes the key participants involved in the industry at the relevant sections.
Key questions answered in the report:
- What is the global PP compound market size in terms of value ($Million) and volume (Kilotons) from 2015-2030 along with the year-on-year growth rates and the CAGR from 2018 to 2030
- What are the different types of PP compounds used in the automotive industry and their growth pattern in terms of value and volume in different automotive parts
- What are the different types of PP compounds used in the automotive industry and their growth pattern in terms of value and volume in different regions
- What is the global glass-reinforced PP compound market size in terms of value ($Million) and volume (Kilotons) from 2015-2030 along with the year-on-year growth rates and the CAGR from 2018 to 2030
- What are the different application areas of glass-reinforced PP compounds used in the automotive industry and their growth pattern in terms of value and volume in different automotive parts
- What is the growth pattern of glass-reinforced PP compounds used in the automotive industry in terms of value and volume in different regions and countries
- Which are the major regions and countries that provide growth opportunities for the glass-reinforced PP compound market
- What is the competitive strength of the key players in the global glass-reinforced PP compound market on the basis of their recent developments, product offerings and regional presence
- Who are the key players (along with their detailed analysis and profiles including their financials, company snapshots, key products and services, and SWOT analysis) in the market
- Who are the key end users of global glass-reinforced PP compound market
- What is the capacity development and forecast of the key players operating in the PP compound market
- What are the different automotive plastics that compete with the PP compound used in the automotive industry
The report further includes a thorough analysis of the impact of the Porter’s Five Forces to understand the overall attractiveness of the industry. Further, the report includes an exhaustive analysis of the geographical split into North America, Europe, Asia-Pacific (APAC), Middle East & Africa, and South America. Each geography details the individual push and pull forces in addition to the key players from that region. This report is a meticulous compilation of research on more than 100 players in the global glass-reinforced PP compound market and draws upon the insights from in-depth interviews with the key opinion leaders of more than 50 leading companies, market participants, and vendors. The report also profiles approximately 16 supplier and customer profiles with their financial analysis, SWOT, and product portfolio.
The supplier profiles offered in the report are LyondellBasell Industries Holdings B.V. , Mitsui Chemicals, Inc., Kingfa Sci. & Tech. Co., Ltd, Borealis AG, Washington Penn Plastic Co., Inc., Sumitomo Chemical Co., Ltd., Japan Polypropylene Corporation, SAUDI BASIC INDUSTRIES CORPORATION, POLYONE CORPORATION, and Ravago.
The key end user companies profiled in the report include Faurecia, Magna International Inc., REHAU, Summit Plastic Molding Inc., Samvardhana Motherson Group, and Yanfeng Automotive Interiors (YFAI).
BIS Research is a global B2B market intelligence and advisory firm focusing on those emerging technological trends which are likely to disrupt the dynamics of the market.
With over 150 market research reports published annually, BIS Research focuses on high technology verticals such as 3D Printing, Advanced Materials and Chemicals, Aerospace and Defense, Automotive, Healthcare, Electronics and Semiconductors, Robotics and UAV, and other emerging technologies.
Our in-depth market intelligence reports focus on the market estimations, technology analysis, emerging high-growth applications, deeply segmented granular country-level market data, and other important market parameters useful in the strategic decision-making for senior management.
Become A Member
BCC Research offers a comprehensive library of reports, granting members unlimited access to data, insights, and market intelligence for informed business decisions, while actively supporting members in their evolving journeys and prioritizing high-quality, relevant topics based on continuous engagement with the research community.
Find Out MoreCustom Consulting
BCC Research emphasizes the importance of organizations leveraging highly customized market insights aligned with specific strategic business objectives through direct engagement with primary sources and proprietary forecasting models for profitable decision-making in maximizing growth opportunities and minimizing risks.
Customize NowScorecard
The Venture Scorecard provides commercialization offices and decision makers with expert analysis, offering strategic insights crucial for aligning objectives with market realities at various stages of commercializing new products or evaluating investment opportunities, from opportunity assessment to growth planning.
Find Out MoreInnovation Spotlight
Our industry experts offer strategic guidance to maximize the market potential of commercialized products, patents, and IP by providing insights into market trends, competitive dynamics, and effective positioning, using the Innovation Spotlight service for enhanced exposure to thought leaders and the wider community.
Find Out More